Forum » Link G4 Plus Software Tutorial » Fuel table inputs running semi sequential vs fully sequential

Fuel table inputs running semi sequential vs fully sequential

Link G4 Plus Software Tutorial

Discussion and questions related to the course Link G4 Software Tutorial


Page 1
Author
196 Views

How much difference will there be in calculating a base fuel table injection duration for a traditional fuel model when setting up a base map for semi sequential fueling. As in using an older G4+ storm blue for a 6 cylinder MPI.

As the injection for the later of the paired injectors injected 120 deg before the intake stroke from what I understand does this make any difference to the actual injection duration?

Hi mack85n, apologies for the late reply - Looks like I missed this post.

I'll assume you've already worked this out by now but the fuel table values should work out to be very close regardless whether you're sequential or semi sequential. There may be some minor changes based on differences in injection timing though.