×

La venta termina hoyObtenga un 30% de descuento en cualquier curso (excepto paquetes)

Termina en --- --- ---

Strange boost cut, what am I missing ?

Ajuste práctico del reflash

Publicaciones del foro

Cursos

Blog

Artículos técnicos

Discusión y preguntas relacionadas con el curso Ajuste práctico de Reflash

= Hilos resueltos

Autor
1534 Vistas

hi guys,

i have a little tuning project on the go at the moment it’s a 1.8t 20v Vw engine with DTA E48 engine management ihi td05 630cc injectors

the problem I’m having is when I adjust the boost any more than 1.5bar (2.5 absolute) it cuts the engine, it has a Magneti 3 bar map sensor fitted and scaled correctly confirmed with Mitty vac and live readings and the boost limit is set to 3 bar absolute

can this magneti 3 bar map sensor actually run up to 2 bar boost ?

Ive been making good progress upto this point but just can’t seem to find the problem, any ideas ?

Thanks Chris

I haven't used a Magneti 3 bar map sensor but if you're able to replicate 3 bar absolute with a mitty vac then the sensor is unlikely your issue. I'd be logging any cut % in the ECU to see if that reveals a little more about what is going on. It's quite possible that you're running into an issue with spark energy causing an ignition misfire which can seem like a cut.

Ok thanks Andre

The is quite an old model ECU and logging is very limited, I’ve used the diagnostic screen whilst replicating the fault and no alarms come up, when the car cuts its instantly turned off and not a soft limiter as such,

if I adjust the duty cycle to produce around 0.2 bar less it completely fine

Check out the video of the what I found

Archivos adjuntos
  • 9526EE23-B1E2-4700-84F5-28C942BE09BD.MOV
  • Solo los miembros Gold pueden descargar archivos adjuntos. Obtén más información sobre cómo convertirte en miembro Gold aquí.

That would certainly put a stop to play

Generalmente respondemos dentro de las 12 horas (a menudo antes)

¿Necesitar ayuda?

¿Necesitas ayuda para elegir un curso?

¿Tiene dificultades con el sitio web?

¿O necesita contactarnos por cualquier otro motivo?