La venta termina hoyObtenga un 30% de descuento en cualquier curso (excepto paquetes)
Termina en --- --- ---
Publicaciones del foro
Cursos
Blog
Artículos técnicos
Discusión y preguntas relacionadas con el curso Ajuste de etanol y combustible flexible
= Hilos resueltos
I have a DD HDX display with a BIM AEMnet box connected via CAN to my AEM Infinity 7 and it is only picking up and displaying the AEM sensors (Fuel Press and A/F Press) that are connected to the AEM ECU. Is there a way to show show more data (Tach, Speed, Oil, Water, etc) on my HDX display? I was thinking there is an enable switch somewhere that I did not check.
Thanks in advance
Ryan
I fixed my own issue by switching the CAN L and CAN H wires. These are a different color coming off of the BIM than the wires coming from my harness. Now to start tuning this monster.
Archivos adjuntos
20240106_132110.jpg
- 20240106_132550.jpg
- 20240308_125437.jpg
- 20240308_125611.jpg
I fixed my own issue by switching the CAN L and CAN H wires. These are a different color coming off of the BIM than the wires coming from my harness. Now to start tuning this monster.
Archivos adjuntos
- 20240106_132110-v2.jpg
- 20240106_132550-v2.jpg
- 20240308_125437-v2.jpg
- 20240308_125611-v2.jpg
