La oferta termina hoy.Obtén un 30% de descuento en cualquier curso (excepto paquetes).

Termina en --- --- ---

Difference in MAF scaling steady-state

Ajuste práctico del reflash

Mensajes del foro

Cursos

Blog

Artículos de tecnología

Discusión y preguntas relacionadas con el curso Ajuste práctico de Reflash

= Hilos resueltos

Responder

Autor

1564 Vistas

Neuteleers98

Tom Neuteleers

Community Member

2 Publicaciones

Belgium

Hello,

After learning the practical reflashing course and following the Ecuflash videos, i started gathering data for my MAF rescaling. However when i do my 2000rpm run (lower then my Engine Load Compensation peak) i have -2% total trim. But when i do my 4000rpm run my total trim is +5%. When i do my WOT run it's around -1% until the end of the run it starts creeping up till -3.5%. Only thing i can think of is: i did my 4000rpm run after my WOT run and thus my ECU was reset. Do i need to drive more before doing another steady-state run?

Thanks,

Tom Neuteleers

Archivos adjuntos