La venta termina hoyObtenga un 30% de descuento en cualquier curso (excepto paquetes)
Termina en --- --- ---
Publicaciones del foro
Cursos
Blog
Artículos técnicos
Something a buddy and i have been working with for a year now this was complete rebuild of a wreck biked a 2015 FLH, we started with a fuel injection system that didn't support odd firing but is very well know and robust in the states( Holley Dominator) its a 2015 FLH with large amount of nitrous and we added a cam sensor to sweeting the deal, after get close to tricking the system the Company reach out to rewrite coding for use to sell threw my buddys company.. we watch all fluids pressure and temps, front and rear suspension we read the height of the front of bike for wheelie control, g and gps are all recorded... the motor is high worked over spare 124ci i had with 14.8:1 compression and the .798 lift cams we managed to squeeze 1.53hp/ci on just the motor, before putting a single stage 105 wet shot into her.. racing this year has been slow start for race for my team, which we decide the theme was Pennywise here few picture, bike is stretch 6 inch and cbr1000 wheels is what rolls on, weight wasn't factor on this build just using what we had laying around rider and bike combo for time being is 960 pounds. I really have to redo the wiring harness, reduce weight and wire up another 3 bikes with same system always open to ideas
Archivos adjuntos
106532334_224309901964559_2505926506506371550_n.jpg
- 107942238_608945923360085_4665307972780191379_n.jpg
- 107997069_606785099973922_4720266349892438039_n.jpg
- 108126098_780917399411707_5718812888791570247_n.jpg
- 108159430_276412136952802_8152933454722530197_n.jpg
- 109403866_601944663789234_3602949313705757831_n.jpg
- bike7.jpg
- bike8.jpg
nice
