×

La oferta termina hoy.Obtén un 30% de descuento en cualquier curso (excepto paquetes).

Termina en --- --- ---

Caliper flushing and sealing

Diseño y optimización de sistemas de frenado

Mensajes del foro

Debate y preguntas relacionadas con el curso Diseño y Optimización de Sistemas de Frenos.

= Hilos resueltos

Autor
286 Vistas

Hi all, I'm about to remove my calipers to be media blasted and Ceracoated.

What is the recommended process for flushing the calipers to remove the old fluid and make them safe for the blasters, and would it suffice to seal the entry port with a bolt to keep the internal passages clear?

It's my first attempt at doing this so any advice would be welcome.

Solemos responder en un plazo de 12 horas (a menudo antes).

¿Necesitar ayuda?

¿Necesitas ayuda para elegir un curso?

¿Está experimentando problemas con el sitio web?

¿O necesita ponerse en contacto con nosotros por cualquier otro motivo?