La oferta termina hoy.Obtén un 30% de descuento en cualquier curso (excepto paquetes).
Termina en --- --- ---
I bought an Einstar Shining 3D scanner. I'm playing around with it to get familiar with how it works. It seems to loose track of my scan quite often. I can get it to pick it back up with a little effort. More of any annoyance than anything. To my question...
Would a faster graphics card make this thing hold better hold the scan track? I have a Nvidia 1080Ti with 11gb VRAM in a box with a 10 core I7
In hindsight I buy the one w/o a cable... and if money available a stand alone version. Also bit annoying it only supports Nvidia as my engineering box is an Intel GPU. Sometime I didn't realize until after purchasing it.
Hey Matthew,
Short answer: I don’t think a new graphics card will fix this. Your 1080Ti with 11GB of VRAM is well above what Shining 3D asks for. The Einstar product page lists a GTX 1060 with 4GB as the requirement, and the EXStar software docs recommend a GTX 1050 with 2GB or better. Neither of them says a faster card helps the scanner hold tracking.
Tracking loss with these scanners mostly comes down to what you’re scanning and how you’re scanning it. In feature mode the scanner lines each frame up using the shape of the part, so it needs plenty of geometry to grab onto. Flat panels, smooth curves and plain cylinders give it very little to work with, and that’s where it tends to lose its place. Shining 3D’s own advice for flat or low-feature parts is to add markers, and in Hybrid mode you only need them on the plain areas, not over the whole part.
A few other things worth checking:
If you can tell me what part you’re scanning when it drops out, and which alignment mode you’re using, I can give you something more specific. A photo of the part would help too.
We also did a webinar on the Einstar (383 | Affordable 3D Scanning - Shining 3D Einstar), and the Tracking & Positioning Targets and Troublesome Surfaces & Objects lessons in the Practical 3D Scanning course cover this pretty well.
On the cable, we did a webinar on the Einstar Vega as well (387), which is the wireless all-in-one version if you end up going down that path.