La oferta termina hoy.Obtén un 30% de descuento en cualquier curso (excepto paquetes).
Termina en --- --- ---
Mensajes del foro
Cursos
Blog
Artículos de tecnología
After enabling only 0-4 mapped points in the vct configuration, I opened the fuel economy distance table and it is still pulling from the mapped point table i disabled. What might cause this?
The distance table won't change just because you've disabled the mapped points. Regardless what the distance table is requesting, the ECM will only allow the mapped points that are enabled. You can log the weighting of the mapped points to see exactly what is happening and confirm this.
