La oferta termina hoy.Obtén un 30% de descuento en cualquier curso (excepto paquetes).
Termina en --- --- ---
Mensajes del foro
Cursos
Blog
Artículos de tecnología
Haga preguntas sobre las lecciones de los seminarios web aquí. Para ver la lista completa de seminarios web sobre optimización de archivos, consulte los seminarios web anteriores .
= Hilos resueltos
I have a DD HDX display with a BIM AEMnet box connected via CAN to my AEM Infinity 7 and it is only picking up and displaying the AEM sensors (Fuel Press and A/F Press) that are connected to the AEM ECU. Is there a way to show show more data (Tach, Speed, Oil, Water, etc) on my HDX display? I was thinking there is an enable switch somewhere that I did not check.
Thanks in advance
Ryan
I fixed my own issue by switching the CAN L and CAN H wires. These are a different color coming off of the BIM than the wires coming from my harness. Now to start tuning this monster.
Archivos adjuntos
20240106_132110.jpg
- 20240106_132550.jpg
- 20240308_125437.jpg
- 20240308_125611.jpg
I fixed my own issue by switching the CAN L and CAN H wires. These are a different color coming off of the BIM than the wires coming from my harness. Now to start tuning this monster.
Archivos adjuntos
- 20240106_132110-v2.jpg
- 20240106_132550-v2.jpg
- 20240308_125437-v2.jpg
- 20240308_125611-v2.jpg
