×

Sale ends todayGet 30% off any course (excluding packages)

Ends in --- --- ---

Home > Forum > Webinar Questions > AEM Infinity 7 not communicating with Dakota Digital HDX Display

AEM Infinity 7 not communicating with Dakota Digital HDX Display

Webinar Questions

Forum Posts

Courses

Blog

Tech Articles

Ask questions about webinar lessons here. To see the Previous Webinars for a complete list of archives tuning webinars. 

Unresolved Threads
= Resolved threads
Reply
Author
50 Views

I have a DD HDX display with a BIM AEMnet box connected via CAN to my AEM Infinity 7 and it is only picking up and displaying the AEM sensors (Fuel Press and A/F Press) that are connected to the AEM ECU. Is there a way to show show more data (Tach, Speed, Oil, Water, etc) on my HDX display? I was thinking there is an enable switch somewhere that I did not check.

Thanks in advance

Ryan

at

I fixed my own issue by switching the CAN L and CAN H wires. These are a different color coming off of the BIM than the wires coming from my harness. Now to start tuning this monster.

Attached Files
at

I fixed my own issue by switching the CAN L and CAN H wires. These are a different color coming off of the BIM than the wires coming from my harness. Now to start tuning this monster.

Attached Files
at
Reply

We usually reply within 12hrs (often sooner)

We usually reply within 12hrs (often sooner)

Need Help?

Need help choosing a course?

Experiencing website difficulties?

Or need to contact us for any other reason?