Forum » EFI Tuning Fundamentals » fuel in injector table

fuel in injector table

EFI Tuning Fundamentals

Discussion and questions related to the course EFI Tuning Fundamentals


Page 1
Author
181 Views

hey just need an explaination about this if we are using a fuel table with ms for example a master pulse width set to 14 ms and in the fuel table we have a number of 50 at 100 KPA so the pulse width will be 0.50*14=7 ms worth of fuel in the cylinder my question if we have the same PW set to 14 ms and same number 50 in the fuel table but a KPA of 80 or lower like 60 50 40 how i will calculate the pulse width ? with lower number than 100 KPA