×

Sale ends todayGet 30% off any course (excluding packages)

Ends in --- --- ---

Understanding AFR: Effect of AFR on Knock Threshold

Watch This Course

$89 USD $44.50 USD

-OR-
Or 8 easy payments of only $5.56 Instant access. Easy checkout. No fees. Learn more
Course Access for Life
60 day money back guarantee

Effect of AFR on Knock Threshold

02.16

00:00 Knock or detonation is the biggest killer of any performance engine so it makes sense that this is one of the key operating aspects we want to be aware of.
00:10 As we discussed in the EFI Fundamentals course, there are a number of parameters that can cause knock, but primarily it is the result of the heat in the combustion chamber exceeding the auto ignition point of a particular fuel.
00:25 With this in mind, any change that results in a rise in combustion temperature can make an engine more prone to knock.
00:33 Since the excess fuel of a rich mixture tends to help cool the combustion charge, it makes sense that a leaner mixture will result in a higher combustion temperature.
00:44 In turn, this can make the engine more likely to knock.
00:50 As long as you understand this, we can easily deal with this in our tuning.
00:55 If your engine is already knock limited, a leaner mixture will almost certainly require some ignition timing to be removed to avoid the onset of knock.
01:06 If your engine previously was not knock limited, you may find that a leaner mixture is sufficient to cause knock.
01:14 For this reason, care is required when using a leaner mixture as timing may need to be removed.
01:21 The flip side of this situation is that often in a severely knock limited engine, we can gain a power advantage by choosing to run the engine with a richer than typical air fuel ratio.
01:34 This can reduce the combustion temperature enough to allow more ignition timing to be used without knock occurring.
01:42 From my own experience, I usually find that there is little to be gained from this scenario by running richer than say 0.75 in turbocharged engines or 0.85 in naturally aspirated engines.
01:57 It goes without saying that at all times when you are tuning an engine, quality knock detection equipment should be used to ensure that you are not operating the engine in knock.
02:08 Knock can cause severe engine damage very quickly and must be avoided.

We usually reply within 12hrs (often sooner)

Need Help?

Need help choosing a course?

Experiencing website difficulties?

Or need to contact us for any other reason?