Forum » Practical Reflash Tuning » HP-TUNERS Launch control?

HP-TUNERS Launch control?

Practical Reflash Tuning

Discussion and questions related to the course Reflashing

Page 1

With Hp-Tuners, are we able to modify a table or parameter to simulate some form of launch control? I have seen others on older versions of HP Tuners modifying one of the spark tables by setting all columns > yourDesiredLaunchRpm to a -15/-20 degrees, set tps to 100% and then shut it off at 1mph or once the car starts rolling.

I am unable to simulate this on the latest version of Hp Tuners with my 2010 silverado. Is their a way to trick the ecu to simulate launch control with an automatic?

There is a course explaining this under "advanced tuning" after the practical tuning courses. HPA sells a ethanol, boost control, and launch control course under this tab.