A cool chassis, a unique engine swap with a local flavour, and pure street intentions, all built by the owner himself. This Barra-powered Mustang caught our attention for all the right reasons.
HPA member Nick Andrews bought his first Fox-body Mustang with plans to turn it into an Indy 500 Pace Car replica, inspired by examples he’d seen in the States.

Then, only a few days after picking it up, a genuine Pace Car appeared for sale. Being that Nick is from New Zealand and Fox bodies aren’t exactly a dime-a-dozen in that part of the world, he knew the opportunity to pick up a real example probably wasn’t going to come up again.
The paint was also in great condition, and that meant kicking the week-old project Mustang to the side and grabbing this genuine example was going to save a whole lot of paint and panel work, with the added bonus that he’d have the genuine article, not a replica.

The Mustang had already lost its original turbocharged four-cylinder engine in favour of a poorly-swapped injected 302, but Nick had a vision, so the existing motor had to go regardless. The plan was an Australian 4-litre straight six turbo Ford Barra motor, a T56 Magnum six-speed manual, all in a car he could drive every day on pump gas.
Before tackling the driveline, Nick fitted coilovers and fabricated a set of side skirts to get the look where he wanted it.

Nick is an experienced car builder, but for this project, he really wanted to push his skills and learn something new using knowledge gained from High Performance Academy courses.
The V8 was pulled, and a $500 naturally aspirated FG Barra was sourced to mock up the conversion with the T56. Nick had actually been collecting parts for his FG Falcon ute build, including a 79mm turbo and manifold. Fortunately, nearly everything fitted well in the Fox Body’s engine bay, except for the sump, which required a decent amount of modification.

From there, Nick worked through the exhaust and the rest of the fabrication, including strengthening the chassis. He cut out the spare-wheel well to accommodate an aluminium drop tank, with an upgraded fuel system to suit the new engine.
In order to handle the seriously increased power output, Nick swapped out the 7.5-inch diff with an 8.8-inch diff from another Fox-body. The brakes also needed upgrading, and Nick ended up producing his own kit to fit six-piston Wilwood calipers up front and four-piston calipers at the rear.
Electronics were going to be a bigger headache, and although Nick had wired plenty of harnesses before, all using relays and fuses, he wanted to try a power distribution module on this build and was keen to push his skills further than ever before.

The Hardwire PDM powers everything from the lights to the engine. A Link Fury X looks after engine management, and a Haltech dash displays the necessary information.
Now that the rest of the car was ready to go, the final motor could be built using Manley rods and JE pistons. As the Fox Body was always intended to be a fast street car, Nick wanted to preserve as much drivability as possible, so the cams remain standard and the variable cam timing is retained.
A Plazmaman plenum and intercooler join the Sinco exhaust manifold and big turbo. On low boost (10psi), the Barra spun up 540hp at the rear wheels, and on high boost (20psi) it jumped to 725rwhp, all on pump gas.
Fast, unique, and very usable — what more could you want in a weekend warrior street car?
