Forum » Engine Building Fundamentals » using plasigage video

using plasigage video

Engine Building Fundamentals

Forum Posts



Tech Articles

Discussion and questions related to the course Engine Building Fundamentals

= Resolved threads

Page 1

At 5 min mark, Andre said accuracy limit to about half a thou (.0005right?) or 12 hundredths millimeter, (.12).

I believe that conversion is not correct. .0005x25.4=.0127 or 12 (or13) "thousandths" of a millimeter (not hundredths).

Convert other way: 012 .012/25.4=.thou=.00047 (almost half thou).

Please advise on which is correct.

Highly enjoying videos. Mechanic for 35 years , military equipment with my personal vehicles on the side.

Cheers to my down under mates!

Hello Arthur can you send me a link to this i cannot not for the life of me find

Regards Ross