AEM Infinity 7 not communicating with Dakota Digital HDX Display

Ethanol & Flex Fuel Tuning

Forum Posts

Courses

Blog

Tech Articles

Discussion and questions related to the course Ethanol & Flex Fuel Tuning

= Resolved threads

Author

549 Views

Ryumph

Ryan Paige

VIP Member

4 Posts

USA

I have a DD HDX display with a BIM AEMnet box connected via CAN to my AEM Infinity 7 and it is only picking up and displaying the AEM sensors (Fuel Press and A/F Press) that are connected to the AEM ECU. Is there a way to show show more data (Tach, Speed, Oil, Water, etc) on my HDX display? I was thinking there is an enable switch somewhere that I did not check.

Thanks in advance

Ryan

Ryumph

Ryan Paige

VIP Member

4 Posts

USA

I fixed my own issue by switching the CAN L and CAN H wires. These are a different color coming off of the BIM than the wires coming from my harness. Now to start tuning this monster.

Attached Files

20240106_132110.jpg

Attachments may only be downloaded by paid Gold members. Read more about becoming a Gold member here.

20240106_132550.jpg

Attachments may only be downloaded by paid Gold members. Read more about becoming a Gold member here.

20240308_125437.jpg

Attachments may only be downloaded by paid Gold members. Read more about becoming a Gold member here.

20240308_125611.jpg

Attachments may only be downloaded by paid Gold members. Read more about becoming a Gold member here.

Ryumph

Ryan Paige

VIP Member

4 Posts

USA

I fixed my own issue by switching the CAN L and CAN H wires. These are a different color coming off of the BIM than the wires coming from my harness. Now to start tuning this monster.

Attached Files