Discuss all things tuning in this section. News, products, problems and results.
I am trying remapping my VE table. I have gone through the steps described in the class for practical re-flash tuning. I am trying to adjust the idle part of the VE for now before I even take it out. It was running like 15% rich. I took out half of the fuel scanned it again and it was still 15% rich. I took out another 6% and its was still rich by 15% The commanded lambda is 1.00 and the engine is running at .85. My car idles at 800 RPM at around 80kPa, it didn't bounce around. I will attach the log file and tune for reference. I am trying my best to learn how to tune but a lot of these issues I'm having don't pop up in the videos lol. Thanks in advance.