Ford’s Mark 2 Escort was a hit when it first launched back in 1974, and it’s remained a staple of the motorsport world ever since. We love a good Mark 2 here at HPA, so when we saw member Steve Carlin’s impressive Escort pop up on HPA Builds, we had to know more.

Steve explained that the project began way back in 1990 and has seen many evolutions since then, going from a fun street car to the hardcore tarmac race car it is today.

The chassis is originally a 1976 German-market RS2000 running the 2-litre Pinto engine. After an initial restoration to get it back on the road, over time the project grew massively in scope, with a big push in 1997 when Steve sourced and fitted a two-litre turbo four-cylinder Cosworth YB engine from the Sierra Sapphire, and then a conversion to full race car in the early 2000s.

There’s still a YB in the car today; however, like the rest of the car, it’s an entirely different beast. The dry-sumped Norris Motorsport-built engine now uses a 200 motorsport block direct from Cosworth, running WRC rods and pistons with a compression ratio of 9.1:1.

Up top, Steve is running a touring car-spec NMS head using double springs, solid Arrow lifters, and very aggressive cams. Boost is provided by an RS500 touring car-spec T4 turbo, cramming air through a custom intercooler to push power up to just over 500hp at the wheels.

MoTeC provides the engine management, anti-lag, launch, and traction control with its M150 ECU, as well as data logging through a CDL3 dash, getting information through a huge array of sensors.

The engine package is backed up by a Tractive TD06 sequential box, which transfers power out to the rear wheels through a ZF Motorsport 3.44 LSD.

With extensive suspension, brake, and carbon bodywork upgrades, according to Steve, the 900kg, 500hp Escort is an absolute weapon to drive at hillclimbs, sprint events, and laps of the Nürburgring — and there are plans to expand more into circuit racing in the near future. Steve’s even taken the Escort to a few top speed events, in which it achieved 179mph, which is quite something for a Mark 2!

We love what Steve’s done with this Escort. It looks tough, it’s fast, light, and it’s properly sorted.
We’ve glossed over a huge amount of the finer details of this RS2000, though, so if you’d like to know more, or you’ve got any questions for Steve, check out his HPA Build page here.
