Harness construction board

I used the nylon rope measuring method then constructed this harness board with little gates using nails and cable ties. The old ply was handy to write the branch numbers and termination points on. Im mid way through the harness construction. Any thoughts or tips? See attached photo.

Hi Joseph, good work on the harness construction board. The only suggestion I'd add is that you can purchase small plastic tabs for mounting your harness to that have double sided tape on the back and take a cable tie - [url=https://nz.rs-online.com/web/p/cable-tie-mounts/3592063?cm_mmc=NZ-PLA-DS3A-_-google-_-PLA_NZ_EN_Cables_And_Wires-_-Cable_Accessories_And_Ties_And_Tools%7CCable_Tie_Mounts-_-PRODUCT_GROUP&matchtype=&pla-391581105107&gclid=EAIaIQobChMIrbHD2aOi5wIVwYaPCh1WcAEnEAQYAiABEgKKIfD_BwE&gclsrc=aw.ds]https://nz.rs-online.com/web/p/cable-tie-mounts/3592063?cm_mmc=NZ-PLA-DS3A-_-google-_-PLA_NZ_EN_Cables_And_Wires-_-Cable_Accessories_And_Ties_And_Tools%7CCable_Tie_Mounts-_-PRODUCT_GROUP&matchtype=&pla-391581105107&gclid=EAIaIQobChMIrbHD2aOi5wIVwYaPCh1WcAEnEAQYAiABEgKKIfD_BwE&gclsrc=aw.ds

Cheers! Yeah i ended up using a few at branch points, i now have it ready for termination. I have attached a photo

Almost there now.