Sale ends todayGet 30% off any course (excluding packages)
Ends in --- --- ---
Forum Posts
Courses
Blog
Tech Articles
Discussion and questions related to the course 3D Modelling & CAD for Motorsport.
= Resolved threads
So I have two Engine mounts that I have to reverse engineer for my e36 swap. I could use the engine mounts I've scanned but they're really heavy and ugly, I wanna make them a bit lighter and a bit more presentable. I'm having trouble with designing them to be easily manufacturable. I've figured out how to cut them so they fit togther, but I'm still struggling in making some "locating" geometry so I can just snap everything in place and weld them together. Any ideas would be appriciated. I'll also post my full fusion project so you guys can take a look at my workflow.
Attached Files
E36-M6x-Swap-Mount-1-v2.stl
- E36-M6x-Swap-Mount-2-v2.stl
- Engine-Mounts-v2.f3z
- m6x_e36_swap_mounts-v2.png
