20 Jun 2024 / By Peter Kelly

'Pops And Bangs' Are BAD | Gear Shift Tuning Tips

'Pops And Bangs' Are BAD | Gear Shift Tuning Tips

20

Don't waste time shifting gears. The 1000hp capable Honda K24 in Mike Burroughs Stanceworks 244 GTK Ferrari build is useless without the ability to put power to the ground, and Scott Hilzinger of Haltech explains how the Haltech electronics system handles this via a Quaife 5-speed dog engagement gearbox.

18 Jun 2024 / By Peter Kelly

The Complete List of Factory-Fitted ITB Engines.

The Complete List of Factory-Fitted ITB Engines.

18

So, you’re looking to convert your engine from a single throttle body to individual throttle bodies (ITBs). While there are plenty of aftermarket individual throttle body options out there from companies like Jenvey and EFI Hardware, some vehicles were blessed with ITBs as standard.

18 Jun 2024 / By Markku Braid

Can You Spin a BMW S52 to 9,200rpm? Edward Graff Did. [FEATURED BUILD]

Can You Spin a BMW S52 to 9,200rpm? Edward Graff Did. [FEATURED BUILD]

18

“Up until High Performance Academy, I had never taken an automotive course in my life… With all the information out there you can learn how to do anything with a car.

14 Jun 2024 / By Taz Quinn-Walshe

Learn To Tune Your Dodge HEMI In 6 Steps [COURSE]

Learn To Tune Your Dodge HEMI In 6 Steps [COURSE]

14

What to learn how to tune a Dodge HEMI V8 or similar using their Artificial Neural Network, aka ANN? Enrol today.

12 Jun 2024 / By Peter Kelly

What IS this thing!?! | EG33 Swap

What IS this thing!?! | EG33 Swap

12

Aleck Kazakovski of GotItRex explains some of the tech talk story of how this GC8/Type R STi has grown into the monster it is today, with multiple time attack wins in Australia and a unique but well-proven setup.

12 Jun 2024 / By Peter Kelly

Build Your First Engine | Simple 10 Step Process

Build Your First Engine | Simple 10 Step Process

12

Interested in building your own engine, or at least learning the steps behind high-performance engine assembly?

Perfect! You’re in the right place. Though it might appear a daunting prospect, we’re here to show you that engine assembly is probably not as hard as you think.

11 Jun 2024 / By Markku Braid

Ryan's 1973 Triumph Spitfire... With a Twist. [FEATURED BUILD]

Ryan's 1973 Triumph Spitfire... With a Twist. [FEATURED BUILD]

11

“If it wasn't for HPA, I don't think I would have ever finished this myself. The wiring alone was enough to scrap the project. ” This week’s featured build is straight out of left field: Ryan Paige’s 1973 Triumph Spitfire — with a twist.

07 Jun 2024 / By Taz Quinn-Walshe

Don't Buy A Used ECU (Without Considering These KEY Points!)

Don't Buy A Used ECU (Without Considering These KEY Points!)

7

Buying a secondhand ECU can be a great way to make your performance dollars go a little further, but you may end up paying twice as much if you get nothing more than a useless paperweight first time around!

Haltech has done a fantastic rundown on some key points to consider when...