Blog
09 Jun 2022 / By Taz Quinn-Walshe
Losing 27% Horsepower And Going 4.9 Seconds FASTER! (How?!)
Having 140hp less might not mean a lot if you're running a 2500hp drag car, but when you go from 590hp to 450hp, that is quite a difference (27% in fact!). 2018 results: 5th place with 1:40. 8430
2019 result: 1st place with 1:38.
07 Jun 2022 / By Taz Quinn-Walshe
Don't Make This Common Brake Bias 'Tuning' Mistake!
Many new to the brake game make this mistake, trying to compensate for an incompatible brake setup via bias adjustment.
03 Jun 2022 / By Peter Kelly
042: Designing and Fabricating (Nearly) Indestructible Parts. [PODCAST]
With CAD software becoming more and more accessible to the general public, a whole new world of possibilities is quickly opening up to the home enthusiast.
02 Jun 2022 / By Taz Quinn-Walshe
Tuning With ECUFlash | Introduction
Introduction to Subaru tuning using the ECUFlash platform. Open source reflashing software can be a very cheap way of modifying the calibration in your late model car.
01 Jun 2022 / By Taz Quinn-Walshe
FreeCAD System Requirements
The system requirements for FreeCAD can vary depending on the specific version and operating system you are using. It's important to note that the complexity of your CAD models and the specific tasks you perform in FreeCAD may require higher system specifications.
01 Jun 2022 / By Taz Quinn-Walshe
System Requirements for Autodesk Fusion 360: What You Need to Know
Autodesk Fusion 360 is a powerful and versatile 3D modelling and CAD software that offers a wide range of design and engineering capabilities. Whether you're a professional designer or a hobbyist, it's important to ensure that your computer meets the necessary system requirements to run Fusion 360 smoothly.
31 May 2022 / By Taz Quinn-Walshe
Why A 4G63 Is BETTER Than An RB26 | R32 GTR 4 Banger
Pulling out a RB26 and replacing it with a 4G63 is not something you see to often, or possibly ever, when it comes to the R32 GTR Skyline chassis, but that is exactly what has been done to this time attack weapon. Let's see what makes it tick.
27 May 2022 / By Taz Quinn-Walshe
Speedsockets Are Clever, People Who Strip Wire With Side Cutters Are Not...Here's Why
Put your side cutters away when stripping wire boys! Get yourself the correct tool, Andre explains why.