06 Jul 2021 / By Taz Quinn-Walshe

Tuning Dual VVT? Watch This! | Cam Timing [FREE LESSON]

Tuning Dual VVT? Watch This! | Cam Timing [FREE LESSON]

6

VVT, AVCS, VVL, VTEC, S-VT, MIVEC or whatever your flavour of variable valve timing is, if you're tuning dual variable valve timing then this lesson is for you!

This is just ONE module from the detailed Variable Cam Control Tuning course, link below.

04 Jul 2021 / By Taz Quinn-Walshe

Just 1 of 44 Modules | What Is A Math Channel and Why Should You Care? [FREE LESSON]

Just 1 of 44 Modules | What Is A Math Channel and Why Should You Care? [FREE LESSON]

4

If someone asked you what a math channel was, how would you explain it?

Not sure? Tim has you covered in this [FREE LESSON] which is just 1 of 44 modules in the Professional Data Analysis course, link below.

29 Jun 2021 / By Taz Quinn-Walshe

What Are Race Spec Circular Connectors? | Motorsport Connectors [#FREELESSON]

What Are Race Spec Circular Connectors? | Motorsport Connectors [#FREELESSON]

29

Race Spec, Mil Spec and Aerospace are just a few terms thrown around, correctly or incorrectly, when it comes to the circular connectors used in motorsport wiring applications, but as the mix of terms implies, there is a massive amount of misunderstanding about how and where these connectors are used...

22 Jun 2021 / By Taz Quinn-Walshe

Former F1 Data Engineer Explains Race Telemetry | MoTeC [TECH TALK]

Former F1 Data Engineer Explains Race Telemetry | MoTeC [TECH TALK]

22

Without data, all you have is an opinion and arguably compromised performance. With systems more popular and cheaper than ever from dedicated data standalone solutions to using a tablet or mobile device, it has never been easier to gather, and the analyze the details in your data.

15 Jun 2021 / By Taz Quinn-Walshe

5 Things You're Doing WRONG | Camshaft Selection and Tuning [TECH TALK]

5 Things You're Doing WRONG | Camshaft Selection and Tuning [TECH TALK]

15

So many people get some, or worst case scenario ALL, of these 5 points wrong when selecting and setting up their performance cam/s. So what are they?

1. ) Choosing the wrong camshaft
2. ) Not setting the timing correctly
3. ) No supporting modifications
4.

12 Jun 2021 / By Taz Quinn-Walshe

Drag Car Wheel Alignment, DIY Carbon Fiber and More | Recently at RaceCraft [UPDATE 012]

Drag Car Wheel Alignment, DIY Carbon Fiber and More | Recently at RaceCraft [UPDATE 012]

12

Carbon fiber oil cooler ducting, wheel alignment tips and coil upgrade update, this is what we've been up to recently at RaceCraft. This is the [UPDATE] which came before RaceCraft webinar '012 | Introduction to VBOX Logging’, details on membership below.

10 Jun 2021 / By Taz Quinn-Walshe

R34 GTR Tuning, Fuel System Troubleshooting & More | Today at HPA [#UPDATE 270]

R34 GTR Tuning, Fuel System Troubleshooting & More | Today at HPA [#UPDATE 270]

10

SR86 track testing, R34 GTR tuning discussion and more in this [UPDATE] taken right before members-only webinar "270 | How to Select a Crankshaft".

01 Jun 2021 / By Taz Quinn-Walshe

It's So Easy To Get This Wrong | Wiring Harness Branching [#FREELESSON]

It's So Easy To Get This Wrong | Wiring Harness Branching [#FREELESSON]

1

. . . but just a little bit of time and planning makes all the difference. This is just ONE module taken from a full motorsport wiring course. Link below.