Blog

17 Dec 2025 / By Markku Braid

The "Invisible" Technology Powering Motorsport

17

Your power distribution module (PDM) can do far more than replace a fuse box, if you know how to use it. Traditional fuse and relay blocks work, but they are blind, fragile and hard to integrate with modern motorsport electronics.

17 Dec 2025 / By Markku Braid

Wastegate Hacks Tuners Wish They Learned Earlier

17

Most tuners ignore the two tricks that actually stabilise a turbo engine’s power. Boost control tuning decides whether your turbo engine delivers usable, predictable power or becomes a complete handful.

17 Dec 2025 / By Markku Braid

Can brake 'upgrades' ruin your car?

17

Before you spend money on a 'big brake kit', let's help make sure you understand what actually changes braking torque. Brake upgrades are one of the most common areas for mistakes in track and performance car builds.

16 Dec 2025 / By Markku Braid

Carbon Parts In 60-Seconds? An Alternative to Traditional Composites

16

Traditional prepreg composites need 12+ hours in an oven or autoclave. UV-cure options can harden in as little as 60 seconds under a cheap UV lamp or even sunlight.

16 Dec 2025 / By Markku Braid

Do cheap 3D scanners OVERPROMISE and UNDERDELIVER?

16

Do 3D Scanner Companies Lie About Accuracy? Four budget 3D scanners, one clear winner, and some surprising accuracy results that manufacturer specs won't tell you. Connor puts four sub-$1000 3D scanners through real-world automotive testing to find which actually delivers usable results for your projects.

04 Dec 2025 / By Brad Smith

152: Building a Lamborghini Gallardo into a WTAC Weapon [PODCAST]

4

There’s no arguing the Lamborghini Gallardo GT3 is no slouch. But the World Time Attack Challenge is a whole different league, and in standard form this factory race car is basically like bringing a knife to a gunfight.

03 Dec 2025 / By Markku Braid

Learn MIG Welding Fast with This Basic Knowledge

3

If you want clean, strong welds, it starts with understanding the process properly and how your MIG welder makes that happen. MIG welding is often seen as the easiest process to learn, but motorsport fabrication places very different demands on the technique.

03 Dec 2025 / By Markku Braid

Converting 3D Scans to CAD Models In Fusion

3

Transform your 3D scanner data into workable CAD models that you can actually design with. Connor shows you how to convert mesh files from 3D scans into functional Fusion, aka Fusion 360 models for automotive or motorsport projects.