Sale ends todayGet 30% off any course (excluding packages)
Ends in --- --- ---
Forum Posts
Courses
Blog
Tech Articles
Tried to fire the car today after many years of delays. 3.0L Variocam 968 with a turbo conversion.
I am not getting any activity from the coils (no spark). I also don't have a cranking RPM signal. I'm thinking the issue is related to the crank sensor being at fault (bad, wired improperly, or not adjusted correctly).
My other sensors seem to be communicating correctly (water temp, oil pressure, fuel pressure, IAT).
Any other ideas before I pull the intake (again!).
Thanks in advance for ideas.
