Blog
25 Oct 2022 / By Taz Quinn-Walshe
How Different Can This Be? | Individual Cylinder Tuning
What is individual cylinder tuning and how does the position and amount of wideband sensors make a difference?
Most tuners will rely on the input from a single lambda sensor mounted in the collector of the exhaust, and while this is effective for the overall engine tune, it is really measuring…
21 Oct 2022 / By Peter Kelly
062: The Secrets to Building a Pro-Level Wiring Harness. [PODCAST]
Why should you be concentric-twisting your wiring? What tools should you buy if you’re looking to build a harness? And when is it actually OK to use a soldering iron? This week on Tuned In, Matt Sanderson from Level Motorsport Wiring aims to answer these questions and many more.
19 Oct 2022 / By Taz Quinn-Walshe
How To Avoid The Big Mistakes | Drift Suspension Alignment Tips
What are some of the biggest mistakes those starting out in drifting make when it comes to suspension setup?
Explanations on caster angles, Ackerman, toe and comparisons between circuit racing and drift setups are discussed in this interview with Mike Squire of Squire Motorsport and Custom.
14 Oct 2022 / By Peter Kelly
061: Tune ANY Factory ECU With WinOLS [PODCAST]
Remember when BMW said the E90's ECU was “unmodifiable”? Remember when Nissan said the same about the R35 GT-R? The aftermarket has always met new challenges head-on, and reverse engineering and modifying any factory computer system with software like WinOLS has become not just a viable solution, but a popular…
13 Oct 2022 / By Taz Quinn-Walshe
HP Tuners Course | How To Use HP Tuners
What to learn how to tune using HP Tuners using MVPI, MVPI 2 or MVPI 3 units?
The Practical Reflash Tuning Course contains a full 6 step worked example filmed using HP Tuners on a LS engine teaching both 'MAF' and 'MAFless' methods of tuning via injectior scaling and Speed Density…
11 Oct 2022 / By Taz Quinn-Walshe
Switching To Slicks? Watch This FIRST
Are slick tyres really all that much better than semi-slicks or road tyres when it comes to other performance upgrades, or are they just a waste of money on a club-level build?
With 2-to-5 seconds on the line per lap at a track like Highlands Motorsport Park, Wayne from Michelin New…
11 Oct 2022 / By Peter Kelly
Getting 1200HP To The Ground | R35 GTR Wheel Alignment
LYFE Motorsport and their 1200HP R35 GTR are no strangers to Time Attack or track records having reset their own R35 record at the 2019 WTAC (when this was filmed), BUT, it takes a lot more than just bolting a bunch of parts together and going ‘full send’ to…
07 Oct 2022 / By Peter Kelly
060: Fabricating a 3000hp Triple Turbo 4-Cylinder Drag Car from Scratch. [PODCAST]
If you’ve spent any time on the internet recently, you’ve probably seen images of an incredible, mind-bending triple turbo SR20-powered tube-frame drag car that’s been doing the rounds. On this episode of the HPA Tuned In podcast, we talk to the guy who built it.

![062: The Secrets to Building a Pro-Level Wiring Harness. [PODCAST]](/assets/Uploads/blog-posts/45bd98bf40/Podcast__FillWzc1MCw0MzBd.00_00_01_16.Still002.png)

![061: Tune ANY Factory ECU With WinOLS [PODCAST]](/assets/Uploads/blog-posts/0ca2ffede3/Podcast__FillWzc1MCw0MzBd.01_14_36_08.Still002.png)



![060: Fabricating a 3000hp Triple Turbo 4-Cylinder Drag Car from Scratch. [PODCAST]](/assets/Uploads/blog-posts/20d3f8c6d7/Podcast__FillWzc1MCw0MzBd.01_22_27_06.Still003.png)
