Blog
07 Jan 2022 / By Peter Kelly
021: Motorsport Wiring is Less Daunting Than You Think [PODCAST]
After a week off for the new year's break, we're back and starting off 2022 strong with an interesting and very informative chat with HPA's wiring and motorsport electronics tutor, Zac Perston.
06 Jan 2022 / By Taz Quinn-Walshe
Cheap Horsepower? | Air Intake Restrictions
It goes without saying that in order to make maximum power from any engine we need to get as much air into the engine as we can.
04 Jan 2022 / By Taz Quinn-Walshe
First Startup? No Base Map? Watch This First! | AFR - Initial Startup
Too rich? Too lean? New ECU? First base map? Fresh build? First startup? If you have any of these things or questions, this video is for you. This is one module from a full suite of courses that teach you how to tune your ECU from scratch.
04 Jan 2022 / By Taz Quinn-Walshe
Brake Bias 101 | Do You Need A Pedal Box?
Want adjustable brake bias? This is a solution.
28 Dec 2021 / By Taz Quinn-Walshe
Tuning Your Suspension? This ONE Aspect Is CRITICAL
Is this the single most important aspect of suspension tuning?
Lateral load transfer is the amount of change on the vertical loads of the tyres. This occurs due to the lateral acceleration (cornering force) imposed on the centre of gravity of the car.
24 Dec 2021 / By Taz Quinn-Walshe
6 Steps To PDM Setup + PDUs, & PMUs [NEW COURSE]
PDM 'How To' course, setup and installation from start to finish. No matter what you call them, there is no debate that power distribution modules are becoming commonplace in the performance automotive world.
24 Dec 2021 / By Taz Quinn-Walshe
Learn How To Build An LS V8 Engine
LS engine swapping? Building your factory LS-powered GM? This LS V8 Worked Example is for you!
Your Practical Engine Building course will provide you with the specialist knowledge and skills required to assemble performance engines with professional results.
24 Dec 2021 / By Peter Kelly
020: The Realities of Building a Monster From Scratch [PODCAST]
On this week's episode of High Performance Academy's Tuned In podcast, Andre is joined by race car fabricator extraordinaire Cody Loveland.



![6 Steps To PDM Setup + PDUs, & PMUs [NEW COURSE]](/assets/Uploads/blog-posts/88f5b09ed2/0857EBCA-AEA1-4C32-8256-BDC15063EACB__FillWzc1MCw0MzBd.jpeg)

