Blog

19 Nov 2021 / By Taz Quinn-Walshe

015: Pushing Rules and Restrictions for Performance with AWA Racing [PODCAST]

19

On this episode of High Performance Academy's Tuned In podcast, we sit down with AWA Racing's team owner and race engineer, Andrew Wojteczko.

19 Nov 2021 / By Taz Quinn-Walshe

How To Balance Your Pistons And Connecting Rods [TECHTALK]

19

Where should you remove material from? Are V configuration engines treated differently to flat 4’s? Should you balance your piston rings? Removing material from your conrods and pistons is a common task when balancing your internal components, let's learn how it’s done.

16 Nov 2021 / By Taz Quinn-Walshe

5 Tips For CORNER WEIGHT Scale Setup

16

To get accurate and consistent results when corner weighting, there are a few simple things you should do during setup. Let’s dive into them.

12 Nov 2021 / By Taz Quinn-Walshe

014: 4G63 and 4B11 Drag Racing Secrets with English Racing [PODCAST]

12

If you have even a passing interest in fast Mitsubishis, you've probably heard of English Racing – few names hold as much weight when it comes to getting the absolute most out of the 4G63 and 4B11 engine platforms.

11 Nov 2021 / By Taz Quinn-Walshe

Engine Failure Data Analysis & More | Today At HPA [UPDATE 296]

11

SR20 swapped Toyota 86 update, anti-lag, motorsport wheel alignments and more in this [UPDATE] release which came right before members only webinar '296 | Traction Control Strategies'. Details on that below.

2 Comments

09 Nov 2021 / By Taz Quinn-Walshe

The 3 Handling Characteristics YOU Need To Check [FREE LESSON]

9

Is your car pulling to the right under braking? Can you corner with more confidence in a left-hand bend compared to a right-hand corner of the same surface and radius while on track? If so, you might need to check your corner weights…

Car behaviour on track is different to general...

05 Nov 2021 / By Taz Quinn-Walshe

013: 4.8L K24 V8 | How to Design and Produce Your Own V8 K Series [PODCAST]

5

The worlds most ultimate 'K Swap'?

Have you ever caught yourself daydreaming about making your own bespoke engine — something completely new, that makes big power, and sounds like heaven. No? Maybe that's just us then.

3 Comments

02 Nov 2021 / By Taz Quinn-Walshe

The Black Art Of Anti-Roll Bar Tuning | Chassis Tuning

2

Anti-roll bars are one of the go-to items when tuning your chassis balance, however, they're also something you don't normally get supplied with any stiffness data from the manufacturer, however, this is something you can measure yourself.