Link G4 Plus Software Tutorial

Link G4 Plus Software Tutorial

$99 USD

If you own a Link G4 Plus or Link G4 ECU, our ‘G4 Plus’ training course is the perfect way to get up to speed with this advanced new product. Learn all the shortcuts, tips and tricks to get you tuning like a pro in no time. You will be tuning faster and with better results, making use of all of the G4 Plus’s sophisticated features.

What you will learn
  • How to customise PC Link to suit your requirements
  • Using the trigger scope function
  • Using keyboard shortcuts to speed up your tuning
  • How to configure the ECU to suit your specific engine
  • Setting up ECU inputs and outputs
  • Using datalogging to speed up your tuning

Buy this HPA course and get 3 months Gold membership free!

Purchase course now

Course Curriculum

  • Getting Started 01.15
  • Downloading and Installing PC Link 02.05
  • Navigating PC Link 05.17
  • Using the Menus and Searching 02.33
  • Connecting to an ECU 01.35
  • Feature Unlocking 01.13
  • Customising PC Link 05.29
  • Keyboard Shortcuts 02.02
  • Metric / Imperial Unit Selection 00.40
  • Runtime Values 01.46
  • Statistics 01.06
  • Onscreen Help 01.30
  • Updating Firmware 02.18
  • Initial Setup 00.18
  • Engine configuration 01.52
  • Trigger Setup 01.18
  • Trigger Scope 00.50
  • Calibrating Ignition Timing 02.45
  • Limiter Setup (RPM / Boost) 02.06
  • Setting Up ECU Inputs 00.57
  • MAP / TPS Setup and Calibration 02.30
  • Engine Temp Setup and Calibration 01.00
  • General Purpose Inputs 01.49
  • Digital Inputs 02.13
  • Input / Output Labelling 00.40
  • Setting Up Auxiliary Outputs 00.26
  • Fuel Pump Output 01.22
  • Engine Cooling Fan 01.23
  • General Purpose Outputs 01.13
  • Fuel Setup 00.23
  • Injection Mode 01.00
  • Fuel Equation 01.13
  • Openloop AFR Table 01.14
  • Master Fuel 01.15
  • Stoichiomteric Ratio 00.38
  • Injector Deadtime Table 00.43
  • Injector Output Test 00.27
  • Ignition Setup 00.15
  • Ignition 02.45
  • Table Configuration 00.20
  • Axis setup 02.02
  • Using the Surface Plot 01.08
  • Tuning the Engine 00.23
  • Using the Cross Hairs 01.39
  • Making Changes to an Individual Cell 01.43
  • Making Block Changes 00.59
  • Adding / Subtracting / Percentage Changes 01.36
  • Importing and Exporting Tables 01.34
  • Using the Quick Trim Function 02.14
  • Using the Quick Tune Function 03.45
  • Using Datalogging 00.43
  • Starting / Stopping the Datalogging 00.59
  • Adding Groups and Parameters 04.19
  • Using Datalogging to Aid Tuning 01.34
  • Configuring Onboard Datalogging 01.59
  • Dowloading a Log File 01.11
  • Advanced Functions 00.24
  • Cold Start Tuning 05.08
  • Individual Cylinder Fuel/Ignition 03.48
  • 4D/5D/6D Compensation 02.42
  • Closed Loop Lambda Control 03.10
  • Idle Speed Control 06.44
  • Transient Tuning (Fuel and Ignition) 05.09
  • Advanced Limits 04.02
  • GP Limits 03.15
  • Anti Lag 06.27
  • Launch Control 04.05
  • Gear Cut Control 03.32
  • Idle Ignition Control 02.17
  • E Throttle 03.02
  • Open Loop Boost Control 03.44
  • Closed Loop Boost Control 09.16
  • Knock Control 05.54
  • Request Certification 00.06

Buy any course and get 3 months Gold membership free