Discussion and questions related to the course Practical Dyno Tuning
| Topic | Posts | Last Post |
|
RX7 FD3S - LINK ECU - Sec W Lockout
By Copyninja on March 7, 2021 at 11:17:52 AM |
4 |
104 mins ago |
|
Trigger setup WRX Impreza
By Kristians on March 2, 2021 at 9:19:58 AM |
3 |
3 days ago |
|
Table shaping with Load based %TP axis
By Toni124 on March 6, 2021 at 12:22:10 PM |
2 |
3 days ago |
|
Equivalence between %TP and MAP
By Toni124 on March 6, 2021 at 12:35:18 PM |
1 |
3 days ago |
|
Rising or falling edge trigger
By Flyatcento on March 3, 2021 at 9:20:04 AM |
4 |
5 days ago |
|
example
By Mlody123 on March 3, 2021 at 8:03:03 PM |
2 |
6 days ago |
|
RX7 FD3S - Cold start and idle issues when cold; no issues when hot.
By Copyninja on March 1, 2021 at 1:57:49 AM |
10 |
6 days ago |
|
Load Axis increments for boosted applications
By Wal on March 1, 2021 at 12:59:28 AM |
2 |
7 days ago |
|
load points
By ShaunKris on February 27, 2021 at 5:22:29 PM |
6 |
8 days ago |
|
adjusting the FPR
By ShaunKris on February 27, 2021 at 5:44:50 PM |
2 |
9 days ago |