Blog
26 May 2023 / By Peter Kelly
086: Forget Billet for a Second… What’s With Aftermarket Cast Blocks? [PODCAST]
Over the last year, we’ve seen a handful of well-respected manufacturers teasing something brand new that pushes against the idea that billet is the only way to go — aftermarket high-performance cast blocks and heads.
25 May 2023 / By Taz Quinn-Walshe
K20 Swapped CRX Build #update
Here's a quick update on what is happening with the Honda EF CRX build. We're ripping out the old EMtron ECU and replacing it with. . . . another EMtron ECU.
24 May 2023 / By Taz Quinn-Walshe
GM Gen III, Gen IV & Gen V EFI Tuning | GM SBC V8 Generation Quick Guide
The General Motors (GM) small block V8 engine has a rich history of powering iconic vehicles.
24 May 2023 / By Taz Quinn-Walshe
HP Tuners MPVI 3 - Quick Introduction
Here's a quick introduction to the HP Tuners MVPI 3 interface including some comparisons to the older MVPI 2 version. NOTE: This quick 'Today at HPA' update video release was delayed, but the information is still relevant/current.
23 May 2023 / By Taz Quinn-Walshe
V12 Swapped 'Pistachio RX7'
How do you trigger both Mercedes and Mazda purists at once? This. This is how you do it, and we think it's awesome.
19 May 2023 / By Peter Kelly
085: Doing a Track Day Right. [PODCAST]
Got a modified road car and are interested in seeing what it’s capable of on the track? On this episode of Tuned In, Andre Nader from DNA Autosport joins us to give some guidance on all things track day setup and preparation.
16 May 2023 / By Taz Quinn-Walshe
Setting Records: RZ34 Z First 9-Second Pass
The RZ34 Z is the newest offering in the Nissan Z line, and AMS Performance was quick to set a world-first 9-second pass using (by today's standards) relatively basic upgrades. Back in 2022 9.
12 May 2023 / By Peter Kelly
084: Going From Inductive Ignition to CDI and Gaining 500hp. [PODCAST]
Bolting a 4000+hp twin turbo V8-powered drag car onto a dyno and pushing it to its limits isn’t for the faint of heart, but it’s just another day in the office for this week’s guest, Anderson Dick of FuelTech USA.