23 Nov 2020 / By Taz Quinn-Walshe

The 3 Handling Characteristics YOU Need To Check [FREE LESSON]

The 3 Handling Characteristics YOU Need To Check [FREE LESSON]

23

Is your car pulling to the right under braking? Can you corner with more confidence in a left-hand bend compared to a right-hand corner of the same surface and radius while on track? If so, you might need to check your corner weights…

Car behaviour on track is different to general...

20 Nov 2020 / By Taz Quinn-Walshe

Why didn't we just put a K20 in it? | 650HP SR20VE Swap | SR86 EP 11 [#BUILD]

Why didn't we just put a K20 in it? | 650HP SR20VE Swap | SR86 EP 11 [#BUILD]

20

With our SR86 build having slowed a little, we decided to take some time out from our regular updates and answer a few common questions we get each time we release a build video.

19 Nov 2020 / By Taz Quinn-Walshe

OEM Wiring Fault Finding | Today At HPA [UPDATE 258]

OEM Wiring Fault Finding | Today At HPA [UPDATE 258]

19

TPS troubleshooting, R34 GTR track tuning/real-world confirmation and cambelt stretch. This is Andres update that came before members-only webinar '258 | Introduction to Rotary Tuning'.

12 Nov 2020 / By Taz Quinn-Walshe

Want Your BMW, Audi, VW, Mercedes or Porsche etc Tuned? It's Getting Easier [TECH TALK]

Want Your BMW, Audi, VW, Mercedes or Porsche etc Tuned? It's Getting Easier [TECH TALK]

12

Compared to Japan and North America, the European vehicle market is not as well supported when it comes to aftermarket tuning options due to some complications that include their factory ECUs requiring physical modification before tuning can even start, however, with the likes of bFlash and map packs from B&C...

09 Nov 2020 / By Taz Quinn-Walshe

1FZ-FE Swapped Toyota 86 | 240HP to 2500HP Boosted86 [TECH TOUR]

1FZ-FE Swapped Toyota 86 | 240HP to 2500HP Boosted86 [TECH TOUR]

9

A 2JZ swap is a popular choice for the Toyota GT86 chassis, but you won't find one under the hood here.

05 Nov 2020 / By Taz Quinn-Walshe

Cam Swap | 650HP SR20VE Engine Conversion | SR86 EP 10 [#BUILD]

Cam Swap | 650HP SR20VE Engine Conversion | SR86 EP 10 [#BUILD]

5

With the Kelford 184ST cams making more peak power than we ever expected, why would we swap them?

In this [BUILD] update Andre runs thought the reason why Nissan P12 Primera cams are being fitted to the SR20 along with how he expects this to see the VVL switch point drop...

05 Nov 2020 / By Taz Quinn-Walshe

R34 GTR Trigger Setup, ITB Tuning and More | Today At HPA [UPDATE 257]

R34 GTR Trigger Setup, ITB Tuning and More | Today At HPA [UPDATE 257]

5

R34 GTR RB26 sensor upgrade, Adaptronic rotary release and Holley EFI Terminator ECU giveaway. These and more topics were covered in the introduction before the members only webinar ‘257 | Selecting Parts For Your Engine Build’. Details on membership below.

02 Nov 2020 / By Taz Quinn-Walshe

6-Second Rotary | Building A Reliable 13b Powered Mazda 6 [TECH TALK]

6-Second Rotary | Building A Reliable 13b Powered Mazda 6 [TECH TALK]

2

Using the Blueprint Racing 6. 53 @ 213mph Mazda 6 for some examples we dive a little into how to build a rotary engine for drag racing.