Blog

08 Jun 2020 / By Taz Quinn-Walshe

Free Motorsport Wheel Alignment Lesson | RaceCraft

8

Do you want to get faster lap times? Or make sure you can beat your mates around the circuit? If so, come along to this free car setup lesson. Claim your spot.

05 Jun 2020 / By Taz Quinn-Walshe

Engine Swap: Is Your Donor Engine A Dud? | Today At HPA [UPDATE 242]

5

What points do you need to check over to ensure that you get a reliable doner engine?

This is Andres update that came right before webinar lesson ‘242 | Harmonic Dampers - Do You Need one?’. Details on membership below. 00:27 FJ40/BJ42 Project - 3B to 3UZ-FE swap.

04 Jun 2020 / By Taz Quinn-Walshe

BJ/FJ40 Series V8 Swap Introduction | Today At HPA [UPDATE 241]

4

Do we have any V8 40 Series Landcruiser fans?
This is Andres update that came right before webinar lesson ‘241 | Tuning for elevation change’. Details on membership below.

03 Jun 2020 / By Andre Simon

Not the project car you were expecting - 40 Series Landcruiser

3

One of our newest projects here at High Performance Academy is probably not one you’d be expecting. Drumroll please. . . it’s our 1982 Toyota BJ42 Landcruiser.

The J40, or simply 40 Series Landcruisers are probably best known via the FJ40-45 models which predominantly came with 4.

01 Jun 2020 / By Taz Quinn-Walshe

4WD, Rotary Powered…WRX? | EJ20 to 13B Swap [TECH TOUR]

1

EJ20 out, twin-turbocharged 13B Mazda rotang in. Let’s find out how, why, and what’s planned for 'The Panda Express'.

29 May 2020 / By Taz Quinn-Walshe

Are Factory Tunes As Good As You Think? | Ep 2 [OFF THE RECORD]

29

Open source tuning our Version 11 Subaru STi.

26 May 2020 / By Taz Quinn-Walshe

4WD Drag Racing | 870HP Stroker 4G63 EVO 8 [TECH TAlK]

26

4WD applications give traction advantages in most motorsports however in the world of drag racing it can sometimes be hard to dial in to ensure that you don’t end up with too much. Running a FuelTech FT600 ECU and a 2.

22 May 2020 / By Taz Quinn-Walshe

Degreeing a Camshaft? You NEED These [FREE LESSON]

22

Getting the right tools is an important step when it comes to any engine building task, and this lesson will help ensure you get it right when it comes to degreeing your cam/s.