Blog

26 May 2020 / By Taz Quinn-Walshe

4WD Drag Racing | 870HP Stroker 4G63 EVO 8 [TECH TAlK]

26

4WD applications give traction advantages in most motorsports however in the world of drag racing it can sometimes be hard to dial in to ensure that you don’t end up with too much. Running a FuelTech FT600 ECU and a 2.

22 May 2020 / By Taz Quinn-Walshe

Degreeing a Camshaft? You NEED These [FREE LESSON]

22

Getting the right tools is an important step when it comes to any engine building task, and this lesson will help ensure you get it right when it comes to degreeing your cam/s.

21 May 2020 / By Taz Quinn-Walshe

How To Avoid The Big Mistakes | Drift Suspension Alignment [TECH TALK]

21

What are some of the biggest mistakes those starting out in drifting make when it comes to suspension setup?
Explanations on caster angles, Ackerman, toe and comparisons between circuit racing and drift setups are discussed in this interview with Mike Squire of Squire Motorsport and Custom.

21 May 2020 / By Taz Quinn-Walshe

Open Source Tuning and an OEM 'Shortcut' That Can Cause You Headaches | Today At HPA [UPDATE 240]

21

RX7 DBW setup, cooling system bling (care of Vinny Fab), Open Source tuning and more. This is Andres update that came right before your members-only webinar lesson '240 | Methanol Tuning Considerations’. Details on membership below.

2 Comments

19 May 2020 / By Taz Quinn-Walshe

Tuning A 3214HP Diesel Engine | Billet Cummins 200PSI Capable Monster [TECH TALK]

19

With a power range of up to 3500HP and the possibility of 200PSI of boost, this Cummins based diesel engine is producing more power than anyone can yet get to the ground efficiently.

18 May 2020 / By Taz Quinn-Walshe

TunerStudio 101 | Introduction To The MS3 Pro | MegaSquirt 3 [GOLD WEBINAR LESSON]

18

With a Mazda Miata for demonstration, we dive into MegaSquirt platform using TunerStudio. MegaSquirt ECUs and the latest version, the MS3 Pro, have long been a popular option when it comes to aftermarket standalone tuning solutions thanks in part to the extensive feature set in a cost-effective package.

15 May 2020 / By Taz Quinn-Walshe

But, does it fit..? | Ep 1 [OFF THE RECORD]

15

You know you have a problem when you're 'not a rotary guy at heart' yet just happen to own two FD3S RX7's. . . To keep Brandon sane during weeks lockdown here in New Zealand he has been working on his modelling skills.